Tuesday, October 15, 2019

Investigating Resistance Essay Example for Free

Investigating Resistance Essay Resistance is a property of a substance that conducts electricity. Resistance opposes the flow of electricity through conductors and it depends on the PHYSICAL NATURE of the particular conductor. In this investigation I must investigate how one of these physical facts affects the resistance. I will split my investigation into four parts, I will firstly plan my investigation. This will allow me to explain how I will carry out my investigation and predict what I think will happen. The second part of my investigation will be the obtaining part. To complete this I must carry out my investigation and record the results. I will then be able to say if my prediction was correct. The third part will be analyzing the results I have made. This will allow me to draw conclusions. The fourth and final part will be evaluating my investigation, I will say if it could have been improved and if it worked as expected. APPARATUS I will need a Digital ammeter and a digital voltmeter because the readings given are a lot closer than with an analog one. I will need just over a meter of 0. 19mm thick nichrome, a meter stick, a power supply, some wires and two crocodile clips PLANNING I have been given a piece of wire called Nichrome, which has a thickness of 0.19mm. I will connect this into the circuit using crocodile clips, I will stretch the wire across a meter stick and connect one crocodile clip at 0cm and one at 10 cm, I will record a reading from both the ammeter and the voltmeter, I will then move the crocodile clip which is on 10cm to 20 cm and again take a reading from both the ammeter and the voltmeter before recording the results into a table. The variable for my experiment will be the length so to keep it a fair test I must use 10 cm jumps each time, use the same metal each time meaning it must be Nichrome of 0. 19mm. I will eventually have a full table of results ranging from 10cm to 100cm. PREDICTION I predict that as the length of the wire increases, the resistance will increase. I predict this will happen because Resistance is due to the atoms in the wire. The electric charges will collide with the atoms, slowing them down. If the wire is longer, then there are more atoms in the way of the charges so the resistance will increase. The resistance will depend directly on the number of atoms in the wire. I have indicated in the rough graph below on what I think will happen and what it will then look like on the graph. RESULTS Results below are first set recorded Length Of Wire Current Voltage Resistance CMSecond set will now be recorded before finding the eventual average Results below are Second set recorded Length of wire Current Voltage Resistance CM (A) (V) (Ohms) The table below shows the average of the results allowing me to plot the graph. It shows the average resistances Temperature Resistance results 1 Resistance results 2 Average Resistance CM (Ohms) (Ohms) (Ohms) . I will now go on to plot the graph before recording my conclusion. Conclusion After recording my results and plotting the graph I can say that my prediction was correct. This shows that resistance is greater the longer the wire is because there will be more atoms for the electrical charges to hit the atoms and get slowed down. From what my results say I am willing to predict that if I had a thicker piece of Nichrome say 0. 37mm thick then the resistance would be even greater because not only will the length give more resistance but now that it is thicker will mean there will be space for more atoms.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.